Depending on the design, mirrored sun protection films offer privacy during the day. However, at night and when the lights are on, this is no longer the case. Reflective films always reflect in the direction from which the brighter light is coming.

Sun protection film reduces the interior temperature and leads to a better sense of well-being. Air conditioning costs can be saved. The effectiveness of the sun protection and the light transmission vary depending on the type of film.

Sun protection films that are attached to the window reflect the sun's rays, which keeps the rooms cooler. With effective and high-quality sun protection films, the temperatures in the rooms can be reduced. The best results are achieved by applying the sun protection film to the outside. With older single-pane glass, window film such as sun protection film can be installed depending on technical possibilities or personal taste. Whether the film is installed inside or outside has no effect on the glass pane.

In practice, the changed lighting conditions are barely noticeable depending on the type of film, as the human eye adapts very quickly to the new conditions. In addition, depending on the tint, the films reduce glare, which is particularly pleasant for the eyes.

Our high-quality sun protection films for interior and exterior installation provide you with noticeable protection from the sun's heat and glare on the window. The heat protection films effectively reduce the room temperature thanks to 50 - 86% energy rejection (depending on the type of film). The rooms heat up less thanks to the window film with sun protection. Air conditioning systems are relieved and the feeling of well-being in your own four walls increases in summer.

A special type of insulation film is one which, in addition to providing good heat protection, also provides insulation against the cold in winter. It reduces heat loss through windows in the cold season by reflecting infrared radiation in the room. This means that the air in the room cannot cool down as much on the cold window pane. This means that in addition to saving energy for cooling the rooms in summer, it is also possible to save energy by reducing the heating requirement in winter. This saves energy consumption and can reduce energy costs in two ways. Save up to 35% energy with insulating film for windows Insulating film for windows reduces heat loss in winter and lowers heating costs. This noticeably relieves the burden on your wallet and reduces CO2 emissions. Ideally, these cold-repellent window films are used on single or double glazing for thermal insulation, as this is where the efficiency is highest. The advantages at a glance Maintaining room temperature Reduction of heating costs Perceived cold near the window disappears Less condensation

Sun protection films consist of at least six layers and usually have a more or less strong mirror effect. They are available in a wide range of colors and tints.

With a high-quality furniture film and the necessary expertise, the rooms in your hotel can be redesigned quickly and dust-free. The Folien-Design-Performance team has gained extensive experience in dealing with a wide variety of films for indoor and outdoor use over the past twenty years. This experience is now available to you when realizing your project! Below you will find out where furniture foil can be used and what makes a quality furniture foil.

Hotel and gastronomy – furniture foil ensures a fresh look Renovating hotel rooms or restaurants with furniture foil is a quick, clean, dust-free and economical solution. It’s clear – guests rightly expect modern furnishings in a hotel. A classic room renovation can be very expensive, and there is also downtime and noise pollution. Modern furniture foil is now a practical, quick and cost-effective alternative to normal renovation. The extremely stable foils are applied to the existing furniture and carefully glued in, similar to car wrapping. Thanks to a wide range of decors, from modern to classic, almost any wish can be realized. In many cases, Klinger furniture foils even have a structure that gives a "real" furniture feel. You can save a lot of money by covering bathroom tiles with foil. Instead of completely re-tiling the bathroom in the hotel, the foil tiles are precisely pre-cut and glued onto the existing tiles. It's practical, looks good and transforms a bathroom into a luxury bathing temple within hours. Furniture foiling is also ideal for counters and the reception area. We offer you a complete service from consultation to on-site installation.

Does your worktop have scratches or ugly marks? Is it faded or just no longer to your taste? We have the solution! A thick, robust furniture film - inexpensive, easy and quick! With a selection of over 200 different decors, you can give your old kitchen worktop an individual and exclusive design. And all without any disruptive construction work. The adhesive films are antibacterial, robust, heat-resistant, waterproof, dirt-resistant and easy to clean. The perfect conditions for everyday use of your kitchen worktop.

Installation: The installation itself differs greatly. While wallpapering requires a variety of tools and a lot of space, applying wall foil is much quicker and less complicated. Robustness: Wall film is more robust than wallpaper. Sticking a poster onto the film with adhesive tape leaves no residue. Unsightly spots can certainly appear on the wallpaper. Washable: The waterproof surface of the adhesive film makes it easier to care for. It can be cleaned quickly and easily with a little water. Dismantling: Removing wallpaper is laborious and time-consuming. Wall film, on the other hand, can be removed in one piece.

Both foil and paint offer advantages when redesigning kitchen fronts: foil is inexpensive, easy to use and available in many designs. Paint, on the other hand, provides a durable and resistant coating, but is more complex and more limited in terms of redesign.

There are countless possibilities for using furniture foils. This includes renovation and redesign of furniture, renewal or rebranding of the reception area/reception, installation of furniture foil in the elevators, redesign of the lobby and restaurant areas and much more! The big advantage of using furniture foil in your hotel is an uninterrupted working environment for your employees and especially for your guests. Furniture foil is installed practically silently, quickly, dust-free and on-SITE! So you don't need to transport the items that are to be covered - the furniture foil "comes" to you. Furniture foil in your hotel can be used for purely decorative purposes as well as for repair purposes. This means you can quickly and easily replace damaged or outdated pieces of furniture in your hotel, for example. Because there is a wide variety of foil structures, even the highest demands can be met when decorating with furniture foil.

Adhesive films for doors, kitchen furniture, kitchen films, cabinet films black, white, light blue, with structure, mint, turquoise, blue, red, green, pink, lavender, lilac, violet, purple, yellow, orange, beige, cream, grey, brown, gold, glitter, gloss, silver, copper, self-adhesive, can be cut to size and much more. The films are washable.

Visible edges and door entrances can be included in the foiling if desired. However, the amount of work involved is very high and requires a lot of experience. This entails correspondingly high costs. Among other things, the entire door must be removed. Door entrances are therefore excluded from standard foiling.

The average cost of car wrapping (also called car wrapping). For the full wrapping of a car, the costs are between 1800 and 5500 euros for (Ferrari, Lamborghini, etc.) The total costs, however, depend greatly on the area and shape. Wrapping the side mirrors, for example, is possible from around 120 euros . A simple company logo should be available from around 150 euros , depending on the size. The cost of wrapping a car can vary greatly depending on the manufacturer of the film and the area or effort involved in a vehicle.

The adhesives, which are specially designed for car paint, do not attack the paint. Before applying the film, new paint or areas with repair paint must be allowed to dry thoroughly, otherwise a chemical reaction will permanently bond the film and paint together. In the case of old paint, the procedure is based on a small test film on a hidden area.

A vehicle with a foil wrap may be driven through the car wash, but do not use hot wax.

Your waiting time depends on the scope of the project: a partial wrapping is completed in one to two days, for a complete car wrapping, the car wrapping employees need five to seven working days.

We don't do any graphic work. If you send me the files, I can print, plot and stick them on for you.

Several factors influence the cost of window tinting in a specialist company. These are: Type and quality of the film type of vehicle Size of the discs Number of car windows to be tinted Type and quality of the film The higher the quality of the film, the higher the price for window tinting. Window films not only look stylish, but can also protect vehicle occupants from harmful UVA and UVB radiation as well as heat. There are various versions that darken to different degrees. In addition to conventional tinting films, there are also metallized films and high-end ceramic films.

The price for professional tinting of car windows with special films depends on the number of car windows, the shape and surface area as well as the vehicle class. For a small car, the costs are around 170 euros, for a station wagon it starts at 250 euros, for an SUV from 300 euros

Films that are available specifically for wrapping boats are generally also resistant to seawater. However, special sealing should be applied to the edges and borders.

The price of a boat wrap is influenced by many different factors. For example , complex shapes are more difficult to wrap than smooth surfaces. Less film is needed for small boats than for large ones, which reduces material costs. And then, of course, the price also depends on which film is actually being applied. Single-colored products tend to be cheaper than effect films . The costs are also cheaper if only individual stickers are applied to the boat instead of a full wrap. Either way, foiling is a cheap and quick alternative to painting the boat . For large-scale foiling, you should budget from 1,500 euros upwards - paint protection and a new look included.

High-quality films, so-called “wrapping films”, last at least 6-7 years, depending on the use. Manufacturers’ warranties usually range between 5-8 years.

Before you start applying the film, the surface must be treated. To achieve good results, the surface to be filmed must be smooth, without scratches, cracks and bumps. On poorly prepared surfaces, damaged areas and bumps become even more visible through the film. Everyone knows this from the protective films on smartphones: even the smallest grains of dust cause the film to be applied to an unclean surface, as the film builds up like a "tent" over it. The surface must therefore be smooth, clean and dust-free. Before the film is applied, special cleaning agents recommended by the manufacturers, so-called "surface cleaners", are used. Before the film is stuck on, a so-called "knifeless tape" is used along the later cut edges. This is a narrow adhesive strip that contains a fine cutting thread, often made of Kevlar. This thread is then used to cut the film cleanly and straight along the cut edges without having to use a cutter knife. The film is then aligned and cut to size using adhesive strips. The backing paper is then separated using a special cutting device and the film application process almost always begins in the middle of the hull from the inside out using a moistened squeegee. Modern films can even be removed and re-applied if there are small adhesive errors. A special structure of the adhesive surface minimizes the initial contact area of the adhesive and allows the applicator to reposition the film during application. This is made possible by the micro-replicated balls throughout the adhesive layer. They prevent the film from sticking when it hits the surface. The micro-replicated balls only activate the adhesive once the film has been satisfactorily positioned. The special adhesive surface structure also contains air channels that make it easy to remove air bubbles in the film using pressure because the air can escape to the outside. The edges are then cut with the knifeless tape and the remains are removed. Difficult areas such as fittings or thru-hulls are carefully cut with a cutter knife. This is followed by the application of edge protection coatings/sealings and protective films, e.g. in the bow or stern area.

The cost of a boat wrap depends on various factors. The condition of the surface to be wrapped and the resulting amount of preparatory work is often the deciding factor. Before the wrap is applied, the surface must be smooth and even, which can require many work steps and hours, especially on surfaces that are subject to heavy wear. The better the surface, the cheaper the wrap will be. Ultimately, however, the price also depends on the individual design requirements and the area to be covered with foil. Depending on the condition, a rough estimate for the freeboard of a 5-meter motorboat is between 1,200 and 1,500 euros (including foil).

The most commonly foiled surface on boats is the hull. Some owners want a new color, others want to protect their gelcoat, and owners of older boats often choose foiling instead of painting the hull. Not only GRP can be foiled, but also boats made of steel, aluminum, carbon or even wood, as long as the surface is smooth. Boat owners are increasingly having other parts of the boat wrapped. Masts are popular and are often covered with a carbon-look film. But the cockpit and the superstructure can also be wrapped, embellished and protected in modern, high-quality films. Films are often a good way to beautify aging boats, not just on the outside but also below deck. Wooden furniture and parts do not have to be removed for the film to be applied and there is a large selection of different looks, structures and colors. Modern, high-quality films can also be shaped very strongly when heated, so that even difficult corners and edges can be covered with the film without cuts. This means that both the built-in components and the GRP surfaces, such as the ceiling or walls, can be given a new look and beautification with films.

The interior film leaves almost nothing to be desired. We use strong DI-NOC film for furniture film in all wood looks, stylish matt metallic surfaces from colored to rose gold to polished stainless steel look, woven surfaces, terracotta, leather, stucco, sandstone, marble and much more. Window tinting as a sporty privacy screen or as thermal insulation, window protection film or anti-slip film? - Feel free to contact us.